|
|||||||||||||||||||||||||
英國GRIMM格林進口氣動隔膜泵 UK GRIMMImported pneumatic diaphragm pump
英國GRIMM格林進口氣動隔膜泵概述：
進口氣動隔膜泵是英國格林研制開發的新三代氣動隔膜泵，采用壓縮空氣為動力源，是一種由膜片往復變形造成容積變化的容積泵。具有質量可靠、使用壽命長、噪音底、震動小、永不死機、做工精細等六大優點，即能抽送流動的液體，又能輸送一些不易流動的介質，具有自吸泵、潛水泵、屏蔽泵、泥漿泵和雜質泵等輸送機械的許多優點。
英國GRIMM格林進口氣動隔膜泵工作原理：
1、壓縮空氣為動力。
2、是一種由膜片往復變形造成容積變化的容積泵，其工作原理近似于柱塞泵，由于隔膜泵工作原理的特點，因此隔膜泵具有以下特點：
⑴隔膜泵不會過熱：壓縮空氣作動力，在排氣時是一個膨脹吸熱的過程，氣動泵工作時溫度是降低的，無有害氣體排出。
⑵隔膜泵不會產生電火花：氣動隔膜泵不用電力作動力，接地后又防止了靜電火花。
⑶隔膜泵可以通過含顆粒液體：因?yàn)槿莘e式工作且進口為球閥，所以不容易被堵。
英國GRIMM格林進口氣動隔膜泵性能特點：1、不需灌引水，吸程最高達7.6m，揚程達84m，出口壓力≥7bar。
2、流動寬敞，通過性能好，允許通過最大顆粒直徑達9.4mm。抽送帶泥漿、雜質時，對泵磨損甚微。
3、揚程、流量可通過氣閥開度實現無級調節(氣壓調節在1～7bar之間)。
4、該泵無旋轉部件，沒有軸封，隔膜等抽送的介質與泵的運動部件、工件介質完全隔開，所輸送的介質不會向外泄漏。所以抽送有毒、易揮發或腐蝕性介質時，不會造成環境污染和危害人身安全。
5、不必用電，在易燃、易爆場所使用安全可靠。
6、可以浸沒在介質中工作。
7、使用方便、工作可靠、開停只需簡單地打開和關閉氣體閥門，即使由于意外情況而長時間無介質運行或突然停機泵也不會因此而損壞，一旦超負荷，泵會自動地停機，具有自我保護性能，當負荷恢復正常后，又能自動啟動運行。
8、本泵無須用油潤滑，即使空轉，對泵也無任何影響，這是該泵最大特點。
9、結構簡單、易損件少，該泵結構簡單，安裝、維修方便，泵輸送的介質不會接觸到配氣閥，聯桿等運動部件，不像其他類型的泵因轉子、活塞、齒輪、葉片等部件的磨損而使性能逐步下降。
10、可輸送較粘的液體(粘度在1萬厘泊以下)。
英國GRIMM格林進口氣動隔膜泵技術參數：
最大流量：18.9-1041L/min
最大揚程：70-84m
出口壓力：0.7-0.84MPa
口 徑：10-125mm
入氣口徑：1/4、1/2、3/4
顆粒直徑：1.5-10mm
最大虹吸高度(干抽或濕抽)：2.4-7.6m
最大輸送固體顆粒：1.5-9.4mm
最大空氣消耗量：9.0-82.6scfm
每行程流量：(小口徑)23cc
每往復流量：46cc、3.9-7.6L
最大往復速度：(小口徑：干運轉320cpm，濕運轉250cpm)；135-400cpm
英國GRIMM格林進口氣動隔膜泵主要用途：
1、泵吸油漆、樹膠、顏料。
2、粘合劑和膠水、全部種類可用泵吸取。
3、泵吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果醬、巧克力等。
4、各種瓦、瓷、磚器及陶器釉漿。
5、油井鉆好后，用泵吸沉積物及灌漿。
6、泵吸各種乳劑和填料。
7、泵吸各種污水。
8、用泵為油輪，駁船清倉吸取倉內污水。
9、啤酒花及發酵粉稀漿、糖漿、糖密。
10、泵吸礦井、坑道、隧道、選礦、礦渣中的積水。泵吸水泥灌漿及灰漿。
11、各種橡膠漿。
12、各種磨料、腐蝕劑、石油及泥漿、清洗油垢及一般容器。
13、可以吸各種劇毒、易燃、易揮發液體。
14、各種強酸、強堿、強腐蝕液體。
15、吸各種高溫液體最高可耐150℃。
16、作為各種固液體分離設備的前級送壓裝置。
海事 排放和輸送 ◆污水 ◆海水 ◆柴油
電子 排放和輸送 ◆廢水 ◆強酸 ◆強堿
汽車 排放和輸送 ◆密封劑 ◆粘結劑 ◆電鍍?nèi)軇?◆溶劑 ◆油漆
化工生產 排放和輸送 ◆肥皂 ◆清潔劑 ◆粘合劑 ◆油墨清潔/擦亮劑
◆油漆/染料 ◆針對剪切敏感物料
煤礦 排放 ◆污水 ◆混水 ◆稀泥漿
醫藥 食物及藥物物料供應和輸送 ◆FDA物料
UK GRIMMImported pneumatic diaphragm pumpsummary:
Imported pneumatic diaphragm pump is a new three generation pneumatic diaphragm pump developed by Green in Britain. It uses compressed air as power source. It is a displacement pump caused by reciprocating deformation of diaphragm. With reliable quality, long service life, low noise, small vibration, never crashes, six major advantages of working fine, the flow of liquid can be pumped, and easy to transport some of the flow medium has many advantages, self suction pump, submersible pump, shield pump, pump mud and impurities such as conveyor equipment.
UK GRIMMImported pneumatic diaphragm pumpworking principle:
1. Compressed air as the driving force.
2. Is a diaphragm reciprocating deformation caused by volume changes in the displacement pump, its working principle similar to the plunger pump, because of the diaphragm pump working principle of the characteristics, so diaphragm pump has the following characteristics:
The diaphragm pump does not overheat: Powered by compressed air in the exhaust is an endothermic process of expansion, the pneumatic pump when the temperature is lower, no harmful gas emissions.
The diaphragm pump does not produce spark: pneumatic diaphragm pumps do not have electricity for power, ground and later to prevent electrostatic spark.
The diaphragm pump liquid containing particles can be: because the volume of imports and working for the ball, so can not be easily blocked.
UK GRIMMImported pneumatic diaphragm pumpperformance characteristics:
1. Without irrigation water, suction lift up to 7.6m, head of 84m, the outlet pressure is greater than or equal to 7bar.
2. Wlow spacious, through good performance, allowing the maximum particle diameter of 9.4mm. Pumping with mud and impurities, little wear on the pump.
3. Head, flow can be achieved through the opening of the valve stepless adjustment (air pressure between 1 ~ 7bar).
4. The pump has no rotary parts, no seals, moving parts, medium diaphragm pump pumping and pump completely separated from the workpiece medium, the transmission medium does not leak out. Pumping so toxic and flammable or corrosive media, it will not cause environmental pollution and harm personal safety.
5. Do not use electricity. It is safe and reliable in flammable and explosive places.
6. Can be immersed in the medium work.
7. Easy to use, reliable, open stop simply open and close the gas valve, because of unforeseen circumstances even if long time no medium operation or sudden stop pump will not be damaged, once over loading, the pump will automatically shut down, with the self protection function. When the load is recovered, and can automatically start running.
8. The pump does not need oil lubrication, even idling, no impact on the pump, which is the biggest feature of the pump.
9. Simple structure, less wearing parts, the pump has the advantages of simple structure, convenient installation and maintenance, pump transmission medium will not come into contact with the valve rod and other moving parts, unlike other types of pumps due to the rotor wear, piston, gear and vane parts such as the gradual decline in performance.
10. Can carry more viscous liquid (viscosity at below 10 thousand CPS).
UK GRIMMImported pneumatic diaphragm pumptechnical parameter:
Maximum flow: 18.9-1041L/min
Maximum lift: 70-84m
Outlet pressure: 0.7-0.84MPa
Caliber: 10-125mm
Inlet caliber: 1/4, 1/2, 3/4
Particle diameter: 1.5-10mm
Maximum siphon height (dry or wet):2.4-7.6m
The largest transport solid particles: 1.5-9.4mm
Maximum air consumption: 9.0-82.6scfm
Flow per stroke: (small bore) 23cc
Per reciprocating flow: 46cc, 3.9-7.6L
Maximum reciprocating speed: (small bore: dry running 320cpm, wet running 250cpm); 135-400cpm
UK GRIMMImported pneumatic diaphragm pumpmain use:
1. Pump paint, gum, paint.
2. Adhesives and glue, all kinds can be pumped.
3. Pump peanut butter, pickles, mashed potatoes, red sausage, jam, apple sauce, chocolate, etc..
4. All kinds of tile, porcelain, brick and ceramic glaze slurry.
5. After oil well is drilled, pump the sediment and grout.
6. Pump various kinds of emulsion and packing.
7. Pumping all kinds of sewage.
8. Use the pump as an oil tanker, barge clearance, absorb the sewage inside the warehouse.
9. Hops and baking powder, pulp, syrup, sugar tight.
10. Pumping water, mine, tunnel, tunnel, ore dressing, water in slag. Suction cement grout and grout.
11. All kinds of rubber pulp.
12. All kinds of abrasive, corrosive oil and mud, grease and general cleaning container.
13. You can suck a variety of highly toxic, flammable, volatile liquids.
14. All kinds of strong acid, alkali and strong corrosive liquid.
15. All kinds of high temperature resistant liquid absorption maximum of 150 DEG C.
16. As a solid liquid separation equipment before the pressure delivery device.
UK GRIMMImported pneumatic diaphragm pumpapplication area:
Maritime emissions and transport the sewage water - - Diesel
Electron emission and transportation - wastewater - acid - alkali
The automobile exhaust and conveying the sealant - - solvent - solvent - binder electroplating paint
Chemical production and delivery of the soap - discharge cleaning agent - adhesive - ink cleaner / polishes
The paint / dye - for shear sensitive materials
The coal mine sewage emissions - water - dilute mud
Medical supplies and food and drug delivery material - FDA
