英國GRIMM格林進口化工混流泵 UK GRIMMChemical mixed flow pump imported

英國GRIMM格林進口化工混流泵概述：

進口化工混流泵系單級、離心式混流泵，適合輸送大流量，低揚程，清潔的或污染性的介質。

英國GRIMM格林進口化工混流泵結構特點：

進口化工混流泵是一種“拉出”式結構泵，在檢查和拆卸葉輪和軸封時，毋須將與泵體相連接的管路拆開。裝有經過精密加工的泵軸，裝有稀有潤滑的軸承，在填料涵蓋中裝有防護軸套。軸承箱的油位，可由油杯來控制。

泵體的支腳，可承受來自管路的任何載荷，并直接傳遞給基礎。這樣，轉子不會因泵受載荷而產生彎曲，從而保證軸承的最佳的使用壽命。規格35-40的泵，其進出口法蘭的尺寸，符合NEN5802和DIN2532標準，壓力等級為1.0MPa；更大規格的泵壓力等級為0.6MPa。由于較大的過流面積，從而減少阻塞。
泵的旋轉方向：從驅動端看泵，為順時針?lè)较颉?br> 動力驅動可采用電動機或內燃機。
泵裝置上可以配備完整的放氣裝置，有利于吸入管路的排氣。
軸封：填料密封或雙端面機械密封。

英國GRIMM格林進口化工混流泵技術參數：

流 量：200-7000m3/h
揚 程：3-30m
口 徑：100-800mm
轉 速：400-1450r/min
功 率：5.5-250kw
電 壓：380V
工作壓力：可達1.0MPa
溫度范圍：-50℃～+180℃

英國GRIMM格林進口化工混流泵適用范圍：

◆化工流程中強制循環
◆海水養殖
◆城市煤氣工程
◆水處理系統

英國GRIMM格林進口化工混流泵用途：

用于輸送清潔和污染的介質，化學中性或腐蝕性的介質。

UK GRIMMChemical mixed flow pump importedsummary:

Imported chemical mixed flow pumps are single stage and centrifugal mixed flow pumps. They are suitable for conveying large flow, low lift, clean or polluting media.

UK GRIMMChemical mixed flow pump importedstructure characteristics:

The imported chemical mixed flow pump is a "pull out" structure pump. When the impeller and shaft seal are checked and disassembled, the pipe connected with the pump body is not to be taken apart. Equipped with a precision machined pump shaft, a rare lubricated bearing is provided with a protective sleeve in the packing cover. Oil bearing box, can be controlled by the oil cup.

The support pin of the pump body can bear any load from the pipeline and pass it directly to the foundation. In this way, the rotor will not bend because of the pump load, thus ensuring the best service life of the bearing. Size 35-40 of the pump, its import and export flange size, in line with NEN5802 and DIN2532 standards, pressure rating of 1.0MPa; larger specifications of the pump pressure rating of 0.6MPa. As a result of the larger flow area, thereby reducing congestion.

The direction of rotation of the pump: from the drive end, the pump is clockwise.

Power driven can use motor or internal combustion engine.

The pump unit can be equipped with a complete deflation device, which is beneficial to the exhaust of the suction line.

Shaft seal: packing seal or double end mechanical seal.

UK GRIMMChemical mixed flow pump importedtechnical parameter:

Flow rate: 200-7000m3/h

Lift: 3-30m

Caliber: 100-800mm

Speed: 400-1450r/min

Power: 5.5-250kw

Voltage: 380V

Working pressure: up to 1.0MPa

Range of temperature: -50 DEG C to +180 DEG C

UK GRIMMChemical mixed flow pump imported scope of application:

The chemical process of forced circulation

The marine aquaculture

The city gas engineering

The water treatment system

UK GRIMMChemical mixed flow pump importedpurpose:

A medium used to transport clean and polluting chemicals, neutral, or corrosive.